So in this post I’ll show you what really drives the cost of solar in California in 2026, why the sticker price is the wrong number to compare, and the one question you need answered in writing before you sign.
The number that matters is your cost per kilowatt-hour
Most people compare solar quotes by the total at the bottom. That’s the wrong place to start.
What you really want to know is what you pay for each kilowatt-hour of power, today and with solar. On the most common time-of-use plans, PG&E, SCE and SDG&E charge about 52 to 68 cents per kilowatt-hour from 4 to 9 PM in the summer. (Here’s how to find your rate on your bill.)
A good solar quote should show you what each kilowatt-hour costs you over the life of the system, and how that compares with what you pay your electric utility company now. A cheap system that’s sized wrong can cost you more per kilowatt-hour than a better one that fits your home.
So when you look at the price, look at what’s behind it. Four things move it the most.
1. System size
Size should come from one place: your last 12 months of usage in kilowatt-hours, plus whatever’s coming next, like an electric car, a pool or another AC unit.
If your system is too small, you end up paying two bills, one to the solar company and one to your electric utility company.
If it’s too big, especially under NEM 3.0, you’re paying for extra power that gets sent back to the grid for only about 5 to 8 cents per kilowatt-hour. Either way, a bad design costs you money. (NEM 1.0 vs 2.0 vs 3.0, explained.)
2. Equipment
Panels are only part of it. The bigger difference is usually the inverter setup: microinverters on every panel, a string inverter, or a battery with the inverter built in. (Here’s how I compare inverters.)
Better equipment and longer warranties cost more up front, but they’re also what keeps your system running for 25 years. So when you compare quotes, compare what’s actually going on your roof and your wall, not just the bottom line.
3. A battery
A battery is the biggest swing in the whole quote. If you’re with PG&E, SCE or SDG&E, you’re under NEM 3.0, and a battery matters a lot more than it used to.
The power you store at noon and use from 4 to 9 PM is worth far more than the 5 to 8 cents you’d get for sending it to the grid. (Why those 5 hours cost you the most.)
Adding a battery at the same time as your solar usually costs less than adding one later, because a later battery is permitted and installed as a separate project. And California’s general rebate for home batteries is closed to new applicants, so don’t count on one to bring the price down.
4. Your roof and your main electrical panel
This is the part that catches a lot of people off guard, because it often isn’t confirmed until after you sign.
Before you sign, a good rep can look at your roof and your breaker panel and tell you whether an upgrade is likely. But the full site survey usually happens after you sign, and that’s what confirms it.
- Your roof. Panels can last 25 years or more. If your roof only has a few years left, it’s usually smarter to deal with it before the panels go on, instead of paying to remove and reinstall them later.
- Your main electrical panel. A lot of older California homes have a 100 or 125 amp panel, and the electrical code limits how much solar and battery power can feed into it. If yours can’t handle the system, you may need a main panel upgrade. That often costs several thousand dollars, and it can add a couple of months once your electric utility company gets involved.
To be fair, you don’t always have to replace the whole panel. Sometimes there’s a simpler fix the code allows, like adjusting the main breaker or using a smart panel. A good company will look for that first.
The one question to get in writing
If you remember nothing else from this post, ask this before you sign anything:
"If the site survey finds I need a main panel upgrade or roof work, who pays for it, and how much?"
And get that answer in writing before you sign.
Here’s what happens way too often. A rep gives you a quote without really looking at your panel, or says the installer will deal with it later. You sign, the site surveyor comes out a few weeks later, and suddenly you’re asked for another few thousand dollars. That’s not a fair way to treat anyone.
When I design a system, I ask about your panel and roof up front, so we can talk through what the site survey might find before you sign. And if it does turn something up, I walk you through your options before anything moves forward.
Why online payback numbers can mislead you
How fast solar pays off depends a lot on which electric utility company you have.
- PG&E, SCE or SDG&E: you’re under NEM 3.0. The extra power you send back earns only about 5 to 8 cents, so you usually need a battery to get real value. That changes both the cost and the payback.
- LADWP or another city-run electric company: you’re not under NEM 3.0. Your extra solar still gets credited close to full price, so solar alone can pay off a lot faster, and a battery is often optional.
So be careful with any payback number you see online. Most don’t tell you which utility they assumed or whether a battery was included. The only payback number that matters is the one built from your usage, your utility and your rate plan. (Is solar worth it in California in 2026?)
Costs solar doesn’t erase
- The Base Services Charge. With PG&E, SCE or SDG&E, most homes pay about 24 dollars a month no matter how much power your panels make. Solar can bring your bill close to zero, but not all the way. (Here’s why you can still owe money at your true-up.)
- Repairs after the warranties. If you own the system, repairs after the warranties run out are on you. So make sure the company standing behind those warranties is going to be around. We’ve already seen a big name like SunPower go bankrupt.
